S-300 ConservAIR Pneumatic Control
$7,704.00
S-300 ConservAIR pneumatic control multiple parallel configuration to accurately control the flow of compressed air to maintain a stable, consistent and lower pressure throughout the entire production facility. As a result, compressor on-line horsepower is reduced, generating significant energy savings.
- Description
Description
S-300 ConservAIR Pneumatic Control CFM CAPACITY 1500
S Series – ConservAIR Flow Controls
The Intermediate Control (I/C)® S-Series, use our unique multiple parallel configuration to accurately control the flow of compressed air to maintain a stable, consistent and lower pressure throughout the entire production facility. As a result, compressor on-line horsepower is reduced, generating significant energy savings.
The Intermediate Control© monitors air pressure as it is delivered to production and releases air from the air receiver as needed to maintain a continuous, stable air pressure supply. The result of using flow controls is reduced waste from leaks, reduced energy consumption from the compressor room and most importantly, constant, stable air pressure for production.
The S Series uses our unique multiple parallel configuration to accurately control the flow of compressed air to maintain a stable, consistent and lower pressure throughout the entire production facility. As a result, compressor on-line horsepower is reduced, generating significant energy savings.
Features & Benefits
- Consists of multiple circuit parallels, meaning active control is achieved without the use of expensive proportiona-integral-derivative (PID) controllers
- Flanged connections
- Liquid filled industrial pressure gauges installed on the inlet and discharge headers accurate within 1%
- Monitors system flow dynamics ensuring adequate supply of air for production
- Pre-packaged and ready for installation
- Pressure tested and thoroughly checked for leaks after fabrication
- Return on investment often 18 months or less including soft costs
The S-300 ConservAIR Pneumatic Control has a max flow of 1500 SCFM with a 3 inch NPT female connection.
Model | Max Flow scfm | Connection Size | L x W x H (in) | Shipping Weight (lb) |
---|---|---|---|---|
S-30 ConservAIR Pneumatic Control | 150 | 1″ npt (F) | 12 x 9 x 15 | 60 |
S-60 ConservAIR Pneumatic Control | 250 | 1″ npt (F) | 12 x 10 x 15 | 70 |
S-100 ConservAIR Pneumatic Control | 500 | 1.5″ npt (F) | 12 x 10 x 15 | 80 |
S-150 ConservAIR Pneumatic Control | 750 | 2″ npt (F) | 19 x 11 x 24 | 110 |
S-200 ConservAIR Pneumatic Control | 1000 | 3″ npt (F) | 19 x 11 x 24 | 120 |
S-300 ConservAIR Pneumatic Control | 1500 | 3″ npt (F) | 19 x 13 x 24 | 130 |
S-600 v | 3000 | 4″ flg | 34 x 14 x 29 | 250 |
Max inlet pressure: 200 psi Max outlet pressure: 195 psi Inlet pressure must be 5 psi or higher than outlet pressure. Contact us for higher pressure requirements. |